Variable Power Supply with Transistor | Circuit PSU

Monday, June 14, 2010

Variable Power Supply with Transistor

electronic circuit diagram


Component parts list:

P1____________500R Linear Potentiometer
P2_____________10K Log. Potentiometer

R1,R2___________2K2 1/2W Resistors
R3____________330R 1/4W Resistor
R4____________150R 1/4W Resistor
R5______________1R 5W Resistor

C1___________3300µF 35V Electrolytic Capacitor (see Notes)
C2______________1µF 63V Polyester Capacitor

D1,D2________1N5402 200V 3A Diodes
D3_____________5mm. Red LED

Q1____________BC182 50V 100mA NPN Transistor
Q2____________BD139 80V 1.5A NPN Transistor
Q3____________BC212 50V 100mA PNP Transistor
Q4 __________2N3055 60V 15A NPN Transistor

T1_____________220V Primary, 36V Center-tapped Secondary
50VA Mains transformer

PL1____________Male Mains plug

SW1____________SPST Mains switch

Notes:
  • P1 sets the maximum output current you want to be delivered by the power supply at a given output voltage.
  • P2 sets the output voltage and must be a logarithmic taper type, in order to obtain a more linear scale voltage indication.
  • You can choose the Transformer on the grounds of maximum voltage and current output needed. Best choices are: 36, 40 or 48V center-tapped and 50, 75, 80 or 100VA.

No comments:

Post a Comment